Transmitter Battery Replacement - Chrysler 2015 300 SRT Operating Information Manual

Transmitter Battery Replacement

The recommended replacement battery is one
CR2032 battery.
NOTE:
• Perchlorate Material — special handling
may apply. Batteries could contain dan-
gerous materials. Please dispose of them
according to respect for environment and
local laws.
• Do not touch the battery terminals that
are on the back housing or the printed
circuit board.
1. Remove the emergency key by sliding the
mechanical latch on the back of the RKE
transmitter sideways with your thumb and
then pull the key out with your other hand.
Emergency Key Removal
2. Insert the tip of the emergency key or a #2
flat blade screwdriver into the slot and gently
pry the two halves of the RKE transmitter
apart. Make sure not to damage the seal
during removal.
Separating The RKE Transmitter Case
3. Remove the battery by turning the back
cover over (battery facing downward) and
tapping it lightly on a solid surface such as a
table or similar, then replace the battery.
When replacing the battery, match the + sign
on the battery to the + sign on the inside of
the battery clip, located on the back cover.
Avoid touching the new battery with your
fingers. Skin oils may cause battery deterio-
ration. If you touch a battery, clean it with
rubbing alcohol.
17