Webdav Service; Iscsi - D-Link DNS-1560-04 User Manual

D-Link Document – User Manual
This table shows the row descriptions.
Row Name
FTP Service
Login banner
Clients
Connections
Login attempts
Timeout
Minimum passive
port
Maximum passive
port
Upload
bandwidth(KB/s)
Download
bandwidth(KB/s)
When it is done, click Apply button.

WebDAV Service

The WebDAV (Web Distributed Authoring and Versioning) option is used to setup WebDAV
protocol. It is an extension of HTTP v1.1 protocol that allows users to manage files across different
operating system platforms. Starting this service will open the following ports on the unified
storage system:
TCP 80 (httpd)

Enable or Disable the WebDAV protocol, and then click Apply button.

iSCSI

The iSCSI (Internet SCSI) option is used to setup iSCSI entity name for block-based access. iSCSI is a
protocol standard that allows the consolidation of storage data. iSCSI allows the system to act like a
storage area network (SAN) over an existing Ethernet network. Specifically, it exports disk devices
over an Ethernet network that iSCSI clients (called initiators) can attach to and mount.
Copyright@2014 D-Link System, Inc. All Rights Reserved.
Enable or Disable.
Configurable login banner. Default is "Welcome to FTP server". Max
characters are 256.
The maximum number of simultaneous clients, default is 20, range is 1 ~
4096.
The maximum number of connections per IP address, default is 32, range is
1 ~ 32.
The maximum number of attempts before client is disconnected, default is
3, range is 3 ~ 32.
The maximum client idle time in seconds before client is disconnected,
default is 60 (sec), valid values are 30, 60, 300, 600, 1800, 3600.
The minimum passive port, default is 49152, range is 1024 ~ 65535.
The maximum passive port, default is 65534, range is 1024 ~ 65535.
The upload bandwidth, in KB/s, default is 0 (no limit)
The download bandwidth, in KB/s, default is 0 (no limit)
Description
62