CCTV CMF1171X Operating Instruction

Color High Resolution Waterproof Dome
Camera Operating Instruction
D E S C R I P T I O N
The series camera adopts SONY newest generation image processing technology-
Enhanced Effio-E. It has high horizontal resolution up to 700TVL as well as advanced
DNR, D-WDR, HS-BLC and other functions. Fashionable and professional appearance
design; IP66 waterproof. Powerful OSD menu(optional) includes Brightness, Contrast,
Saturation adjusting functions; Multi-area, White Balance, AGC , and other functions
ensure clear bright pictures. Besides, Mirror, Privacy and other aided functions make it
suitable for various special environments and realize simple and convenient round-clock
surveillance.
Enhanced Effio-E Advanced Image Processing Technology; 700TVL High Resolution
420 TV Line
PRECAUTIONS
Thank you for your purchasing this product. Before attempting to connect or operate this
product, please read these instructions carefully and save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
1. Use the Appropriate Power Supply
The input power for the camera is DC12V.
power. Wrong connection may cause malfunction and/or damage to the video
camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
①Locations where temperature is lower than -10℃or higher than 50℃;
②Locations where humidity is higher than 95%;
③Locations where there are large amounts of water vapor and steam.
5. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use
a mild detergent and wipe gently.
6. Clean the CCD faceplate with care.
When cleaning the CCD panel, do not use strong or abrasive detergents. Use a piece
of lens tissue or cotton tipped applicator and ethanol.
7. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that
causes mear to appear irrespective of whether the camera is operating or not. This can
damage the CCD (Charge Coupled Device).
8. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device
which emits strong electromagnetic field, some irregularity such as noise on monitor
screen may happen.
High Resolution
700TVL horizontal resolution with 1/3" sony 960H CCD.
D-WDR
Advanced D-WDR technology greatly improves its image quality under variable
lighting conditions.
HS BLC
It can distinguish strong strong light spots, and cover them to improve the definition
of the entire image and thus ensures clearer and more effective surveillance.
IP 66 Waterproof
Waterproof, Dust Prevention Design.
700 TV Line
Be sure to connect it to the appropriate
FEATURES
Privacy Mask(optional)
Up to 4 areas can be masked to protect personal privacy by concealing parts of the
image from view.
Auto D/N Swithover Operating Mode
COLOR mode in daytime when there is enough light and B/W mode at night when
the illumination is low and IR turned on automatically.
OSD Menu(optional)
Powerful OSD menu allows for various function settings.
2D-DNR
Use special algorithm, reduce video and color noises, which increases its resolution
and cleanliness and creates clearer and sharper images.
PARTS INSTRUCTION
4 Point-
Drilling Position
1
Corresponding
installation
Camera Installation:
1. Affix the Installation instructions sticker on the wall;
2. Let base holes align the holes (sticker on the wall), and
use screws to secure the base on the wall;
3. If you want to adjust the lens, you need loosen the
Glass cover screw (four), then adjust the lens;
4. When you finished the lens adjustment, then install
the Ball cover component.
5. Installation complete.
Notice: Camera front-end mark on mounting bracket should face to the monitoring area.
Adjust Camera Direction
When camera is fixed on the ceiling,
you can adjust its three-dimensional
± °
bracket to the angle you need: X: 175 ,
° ± °
Y:0-70 , Z: 175 . Adjust the lens to the
focal length you need and adjust the focus
again to get clear pictures.
DIMENSIONS (Unit: mm)
（φ ）92
99
54.5
（φ ）144
SPECIFICATIONS
Model No
Sensor
Video Format
Resolution
Mini Illumination
S/N Ratio
AGC
BLC
Iris Control
Shutter Speed
Mode
White Bal
Range
Mirror
Day/Night
Privacy
Adjustment
Title
2D-DNR
D-WDR
Sync Mode
Voltage
Current
Lens
Operating Temp
Storage Temp
Dimension
Weight
*Specifications subject to change without notice.
1. Installation instructions sticker
2. Glass cover screw (four)
2
3. Ball cover components
3
4. inner cover I
5.OSD menu
6. Lens
4
7. Base
5
8. Install screws hole (four)
6
7
8
±175°
X
0-70°
Y ±175°
Z
125
4.5
1/3 " 960H High Sensitivity CCD
PAL/NTSC
700TVL
0.01Lux
>50dB (AGC OFF)
AUTO; MANUAL
ON; OFF; HLC
Electronic Iris/Auto Iris Lens
1/60(1/50)-1/100000 Second
MANUAL;ATW; USER
(ATW) 2200~10000°K
ON/OFF
AUTO; COLOR; B&W
ON/OFF(1-4 AREAS)
HIGH LUMINANCE; LOW LUMINANCE
ON/OFF (15 Characters Max)
ON/OFF
ON/OFF
INTERNAL
DC12V
<200mA
2.8-12mm
-10℃~50℃
-20℃~50℃
144mm（φ ）* 99mm(H)
850g