Adjusting The Wing Position And Centre Of Gravity; Spare Parts - J. Perkins Nano Stik Instruction Manual

Adjusting the wing position and centre of gravity

It's possible to adjust the position of the wing and center of gravity (CG) to fine-tune the overall flight
performance and handling of the Nano Stik in various flying areas and conditions. For example, moving
the wing forward/toward the front of the model will result in a less nose heavy CG that allows the model
to fly more slowly and with a more 'nose high' attitude in cruise flight. This is particularly desirable when
flying in smaller indoor areas while moving the wing backward/toward the rear of the model results in a
more nose heavy CG for faster cruise flight in larger indoor areas.
Out of the box the front/leading edge wing and landing gear mount on the fuselage stick is typically
positioned approximately 1-7/8" (47.5mm) from the front of the gearbox. This wing/CG position works
very well in most flying areas and conditions. However, by loosening the screw in the front/leading edge
wing and landing gear mount and carefully moving this and the rear/trailing edge wing mount on the
fuselage stick you can change the overall wing position and CG.
NOTE: We suggest moving the position of the wing by no more than 1/8" (3mm) forward or backward of
the standard position.

Spare Parts

The product team at J Perkins hopes that you enjoy your new Nano Stik. Whether flying outdoors
or indoors we think that the Micro Stik is a model that you'll be proud to show off to your friends and
flying buddies. If you ever need replacement parts, please refer to your local model shop using the part
numbers below. And don't forget to visit our website regularly at www.jperkinsdistribution.co.uk so you
won't miss our future Micro Series releases!
Part # Description
4499541 Nano Stik Fuselage and Brackets
4499542 Nano Stik Main Wing Green (1)
4499543 Nano Stik Main Wing Red (1)
4499544 Nano Stik Tail Set Green (1)
4499545 Nano Stik Tail Set Red (1)
4499546 Nano Stik Landing Gear (1)
4499547 Nano Stik Propeller with spinner (1)
4499548 Nano Stik Propeller Shaft (1)
4499549 Nano Stik Gearbox with shaft (1)
4499550 Nano Stik Motor with pinion (1)
4499551 Nano Stik Battery 30mAh 3.7V (1)
4499552 Nano Stik 2-in-1 Receiver board (1)
4499553 Nano Stik Magnetic Actuator (1)
4499554 Nano Stik Transmitter Mode 2 (1)
4499555 Nano Stik Transmitter Mode 1 (1)
4499556 Nano Stik USB charge lead (1)
Standard position is approx.
1-7/8" (47.5mm). Move
forward to fly more slowly or
backward to fly faster by up
to 1/8" (3mm) max.