Mark Levinson N 320S Owner's Manual page 56

Controls & Modes
4-10
SSP (Surround Sound Processor) Mode (continued)
7. Press and hold the front panel or remote control setup button
Name=INPUT 1
Input 1 is used
here as an example
and may be substi-
tuted for whichever
input was selected
in step 3 (page 4-9).
8. Press the front panel or remote control enter button once to
Name=_______
9. Rotate the front panel volume knob or press the remote
Name=SSP
10. Press the enter button to select the SSP name, which activates
SAVING DATA
until the Name parameter for the selected input opens on the
front panel display as shown to the left.
• The front panel setup LED lights red to indicate that the
setup menu is open.
select the Name parameter and access the custom names list.
• The current input name will blink on the front panel
display as shown to the left to indicate that a new input
name can be selected from the custom names list.
control volume ± buttons to scroll through all custom input
names until the SSP name appears on the front panel display
as shown to the left.
SSP mode.
• The SAVING DATA message will appear on the front panel
display as shown to the left to indicate that the SSP name
is being saved.
Mark Levinson