Mark Levinson N 320S Owner's Manual page 11

Nº 320S
Placement
Item
Detachable AC power cord
Link communication cable
1/8-inch hex key
Phillips-head screwdriver (size 1)
Nº 320S remote control
White gloves (pair)**
Warranty & Product Registration Card
* The remote control comes with two AAA batteries, which
should be replaced as needed.
** The white gloves are provided to assist with the initial unpacking
and installation of the Nº 320S.
DO
• install the Nº 320S on a solid, flat, level surface such as a
shelf or table.
DO
• install the Nº 320S close to associated components to
keep interconnect cabling as short as possible.
Note
In some cases, it is better to use longer interconnect cabling
between the preamplifier and the power amplifier to allow
for shorter loudspeaker wires.
DO
• select a dry, well-ventilated location out of direct sunlight.
DO
• allow at least a 4-inch clearance above the Nº 320S for
proper heat dissipation. It is strongly recommended to install
the Nº 320S on its own shelf for proper ventilation.
DO
• refer to Dimensions (page A-3) for assistance with custom
installations.
DO NOT
• place the Nº 320S on a thick rug or carpet or cover
the Nº 320S with a cloth, as this might prevent proper cooling.
DO NOT
• expose the Nº 320S to high temperatures, humidity,
steam, smoke, dampness, or excessive dust. Avoid installing
the Nº 320S near radiators and other heat-producing appliances.
Getting Started
Quantity
1
1
1
1
* 1
1
1
(continued)
1-5