Mark Levinson N 320S Owner's Manual page 41

Setup Menu
Character List
3-6
(continued)
The character list shown to the left provides access to 76 characters
that can be used to enter custom input names one character at a
time. Custom input names can consist of up to 7 characters,
including letters, numbers, punctuation marks, and blank spaces.
A custom input name entered with the character list replaces the
factory-default INPUT 1 name on the custom names list.
To customize the name of the selected input:
1. Rotate the front panel select knob or press the remote control
select ± buttons to select the desired input.
• The front panel display indicates the name and volume
level of the selected input.
2. Press and hold the front panel or remote control setup button
until the Name parameter for the selected input appears on
the front panel display.
• The front panel setup LED lights red to indicate that the
setup menu is open.
3. Select one of the following options:
• Press the front panel or remote control enter button once
to select the Name parameter and access the custom
names list shown in the top-left corner of the previous
page. The current input name blinks as shown to the left
to indicate that a new input name can be selected from
the custom names list.
• Press the front panel or remote control enter button twice
in succession to select the Name parameter and access the
character list shown in the top-left corner of this page.
The first character in the current input name blinks as
shown to the left to indicate that a new character can be
selected from the character list.
4. Rotate the front panel volume knob or press the remote
control volume ± buttons to scroll through all custom input
names included on the custom names list or all characters
included on the character list.
5. When the desired custom input name or character is selected,
press the enter button to:
• Select this custom input name (if the custom names list
option was selected in step 3). The SAVING DATA message
will appear on the front panel display to indicate that the
new input name is being saved.
Mark Levinson