Maintenance; Water Tank; Microfiber Pad; Water Filter - Hoover HARD FLOOR PRO Owner's Manual

Familiarize yourself with these home maintenance tasks as proper use and care of your Steam Mop will
ensure continued cleaning effectiveness.
If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or
dropped into water, please call Hoover authorized distributor.

WATER TANK

IMPORTANT
Allow the steam cleaner to fully cool down
before performing
troubleshooting checks.
How to Empty
„ Remove the water tank located on the front
side of Steam Mop (3.1).
„ Twist the cap counter-clockwise to remove
(3.2).
„ Empty any excess water into the sink, allow
to air dry and replace water cap and return
tank to the Steam Mop (3.3).

MICROFIBER PAD

IMPORTANT
Allow the Steam Mop to fully cool down
before performing any maintenance or trouble-
shooting checks.
How to Remove
„ Step on exposed
tab located
back of microfiber
pad (3.4). Lift
Steam Mop away
from microfiber
pad to remove.

WATER FILTER

When to Replace
IMPORTANT
The condition of the filter affects the
performance of your machine.
Check and change filter (depending on level of
use and water conditions in your area).
Do not operate Steam Mop without Water
Filter in place.
„ Your machine is fitted with a Water Filter.
„ To locate Water Filter, remove water tank on FRONT of Steam Mop.
„ If you live in an area of hard water the filter will discolor/darken over time. Depending on water
hardness and/or frequency of use the filter should be changed every 12 months (3.5).

3. MAINTENANCE

any maintenance
3.4
on
3.1
or
3.3
How to Clean
IMPORTANT
Never use bleach or fabric softener when
washing the pad.
„ Machine washable on "WARM" setting.
Always use a detergent.
„ For best care results, lay flat to dry.
3.5
10
3.2
What to Buy
Contact Hoover
authorized distributor