Page 1
The Easy to Use Deep Cleaner Congratulations on your purchase! ™ SteamVac 6 rotating brushes that deep clean carpets and scrub bare floors! SteamVac™ Widepath™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.com ™ ™ ™...
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer.
1. Assembly Carton contents Unpack deep cleaner from the carton and identify the parts shown. Remove and dispose of the packing. A. Deep cleaner B. Upper handle with powered hand tool C. Bolts (2) D.
Page 4
Insert projections on holder into slots on back of cleaner. With hose hook (A1) and cord hook (A2) to back of deep cleaner, push upper handle down onto lower handle. Push bolts into holes on front of handle. If bolts will not go through hole easily handle is not pushed completely down.
Page 5
1-10 Press cord into cord clip on back of handle. Pull cord tight and wrap cord around hooks (A2). 1-13 Position stair/upholstery nozzle in holder at base of cleaner and snap it into place as shown at arrow. 1-16 How to reattach tool cover The tool cover is designed with a break- away feature which allows it to snap free...
2. How to use Deep Cleaner Description Operate deep cleaner only at voltage specified on data plate on back of cleaner. Plug deep cleaner into a properly grounded outlet. ON/OFF pedal & Handle release pedal Step on pedal (A) to turn deep cleaner on.
Using cap, measure detergent following the chart below. For carpet, carpeted stairs and uphol- stery: Fill cap to fill line (5 ounces) with HOOVER Carpet/Upholstery Detergent. For bare floors: Fill cap to fill line (5 ounces) with HOOVER Bare Floor Cleaner* Do not use Bare Floor Cleaner on carpet or upholstery.
NOTE: Use only HOOVER detergents. They are specially formulated for use with your ‘SteamVac’ deep cleaner. CAUTION: Detergents contain Anionic and Nonionic Surfactants. Avoid contact with eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water.
3. How to clean Before you begin cleaning a. Vacuum thoroughly - For carpet, use a HOOVER vacuum cleaner with an agitator for best results. Vacuum uphol- stery with a vacuum cleaner with clean- ing tool attachments. Use a crevice tool to reach into tufts and folds.
9. Do not use the deep cleaner on hard- wood floors. 1. Fill clean solution tank with HOOVER Bare Floor Cleaner* according to instructions for Figs. 2-8 to 2-14. Do not use any type of wax with your deep cleaner.
1. Place handle in upright position. Agitator brushes will not rotate while handle is in upright position. 2. Fill clean solution tank with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-8 to 2-14. 3. Attach tool to end of hose.
1. Place handle in upright position. Agitator brushes will not rotate while handle is in upright position. 2. Fill clean solution tank with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2a-8 to 2-14. 3. Attach tool to end of hose.
• calling 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only). Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay. If further assistance is needed, contact...