Initial Camera Settings - Ikelite 6282.68 Supplemental Instructions

Initial Camera Settings

- Insert a fully charged battery.
- Set Shooting Mode to
In Shooting Menu:
-
Set Image mode to "16m."
Set White balance to "Auto." If more accurate colors are desired,
we recommend setting manual white balance underwater using a white
slate or white sandy bottom. Manual white balance should be reset for
each working depth due to color absorption caused by the water. When
adding a UR-Pro color filter, reset manual white balance for each
working depth.
Set Continuous to "S" Single.
Set ISO sensitivity to "200."
Set AF area mode to "Center" and Autofocus Mode to "AF-S" Single AF.
Set Quick effects to "Off."
- In Setup Menu:
Set Time Zone and Date.
In Monitor Settings set Image Review to "ON."
Set Photo VR to "On."
Set Motion Detection, AF-assist beam and Digital Zoom to "Off."
Set Auto off to "5 min."
Insert and format a SD or SDHC memory card.
Set Blink warning to "OFF."
- Set Flash Mode to "Fill flash ."
- Set Macro mode
overexposed, use "-" exposure compensation tand/or back away, zoom
in, and then reshoot.
4
(before placing camera in housing)
"Auto Mode."
to "On" when shooting close-up. If the image is