One-Touch Turn Signal; Auto High Beam System - Honda Pilot 2016 Owner's Manual

VEHICLE CONTROLS
Cargo Area Lights
Located on the rear ceiling in front of the tailgate.
ON position: Cargo lights remain on.
Door-activated position: Cargo lights turn on when
the tailgate is opened.
OFF position: Cargo area lights remain off.
Exterior Lights
Rotate the switches on the headlight lever to operate the exterior lights. Push the
lever forward to turn on the high beams. Return the lever to its original position for
low beams.
OFF: All exterior lights are off.
: Turn on exterior lights except headlights.
AUTO: Turn on the automatic lighting feature.
Headlights turn on or off depending on ambient
brightness when the vehicle is on. Headlights
automatically come on after the wipers are
engaged for a certain time.
: Turn on all exterior lights including headlights.
: Turn fog lights* on or off.

One-Touch Turn Signal

Use this quick and convenient method to signal a lane change.
Lightly push the turn signal lever up or down for a
three-blink sequence.
For a continuous signal, push the lever up or down
until it locks into place.
38 |
Door-
activated
Off
position
On
High beams
Flash high
Fog
beams
Low
lights*
beams
Right turn
Left turn
*if equipped

Auto High Beam System*

Automatically changes the low beam headlights to high beam headlights when
necessary.
How It Works
When you are driving at night above 25 mph (40 km/h) and the headlight lever is
in the low beam position with the switch rotated to AUTO, the system changes
between low and high beams depending on the brightness of the vehicle lights
ahead of you.
Your vehicle
If a vehicle is detected ahead of you, the headlights stay in low beams. If the
system does not detect any vehicles ahead of you, the headlights change to high
beams.
Certain conditions, such as weather and brightness of other vehicles' lights, can
affect system operation.
Turning the System On or Off
Make sure the headlight lever is in the low beam
position with the switch rotated to the AUTO
position. The auto high beam system indicator
comes on.
To disable the system: Pull and hold the headlight
lever toward you until the indicator flashes twice.
To enable the system: Pull and hold the headlight
lever toward you until the indicator flashes once.
VEHICLE CONTROLS
Oncoming
vehicle
Vehicle ahead
of you
Headlight
switch
*if equipped
| 39