Table of Contents
Advertisement
VEHICLE CONTROLS
Interior and Exterior Lights
Operate interior and exterior lights when the vehicle is on or off.
Brightness Control
n
Adjust instrument panel brightness
when the vehicle is on.
To brighten: Turn the dial up.
To dim: Turn the dial down.
A beep sounds when the brightness
reaches its minimum or maximum.
Interior Lights
n
Change the interior light settings using the switches on the ceiling.
ON position: Interior lights remain on.
Door-activated position: Interior lights come on when any of the doors are
opened, the driver's door is unlocked, or the vehicle is turned off.
OFF position: Interior lights remain off.
Map Lights
n
Press the map lights to turn on or off.
38 |
Exterior Lights
n
Rotate the switches on the lever to
operate the exterior lights. Push the
lever forward to turn on the high
beams. Return the lever to its original
position for low beams.
OFF:
All exterior lights are off.
Turn on exterior lights except headlights.
AUTO: Turn on the automatic lighting feature. Headlights turn on or off
depending on ambient brightness when the vehicle is on.
Headlights automatically come on after the wipers are engaged for
a certain time. The headlights come on when you unlock a door in
dark areas with the headlight switch in AUTO.
Turn on all exterior lights including headlights.
*1
Turn fog lights
on or off.
One-Touch Turn Signal
Use this quick and convenient method to
signal a lane change.
Lightly push the turn signal lever up or
down for a three-blink sequence.
For a continuous signal, push the lever up
or down until it locks into place.
Auto High Beam
The front sensor camera detects the light sources ahead of the vehicle such as
the lights of a preceding or oncoming vehicle, or street lights. When you are
driving at night, the system automatically switches the headlights between low
beam and high beam depending on the situation.
VEHICLE CONTROLS
*1 - If equipped
| 39
Advertisement
Table of Contents
