Table of Contents
Advertisement
SAFETY
Installing a LATCH-Compatible Child Seat
A LATCH-compatible child seat can be installed in each of the second- and third-
row seats. A child seat is attached to the lower anchors with either the rigid or
flexible type of connectors.
1. Locate the lower anchors under the marks.
2. Place the child seat on the vehicle seat, then
attach the child seat to the lower anchors
according to the instructions that came with the
child seat. Make sure that the lower anchors
are not obstructed by the seat belt or any other
object.
18 |
Second-row bench seat
Marks
Second-row captain seat
Marks
Third row seat
Marks
Lower anchors
Rigid type
Flexible type
3. For second-row outer seats: Raise the outer
head restraint to its highest position, then route
the tether strap between the head restraint legs,
and secure the tether strap hook onto the anchor.
Make sure the strap is not twisted.
For the center seat: Lower the center head
restraint to its lowest position, then route the
tether strap over the top of the head restraint,
and secure the tether strap hook onto the anchor.
Make sure the strap is not twisted.
For third-row outer seats: Route the tether strap
hook between the head restraint legs, and secure
the tether strap hook onto the anchor. Make sure
the strap is not twisted.
4. Tighten the tether strap according to the seat
maker's instructions.
5. Make sure the child seat is firmly secured by
rocking it forward and back and side to side; little
movement should be felt.
6. Make sure any unused seat belt that a child can reach is buckled, the lockable
retractor is activated, and the belt is fully retracted and locked.
SAFETY
Second-row bench seat
Tether strap hook
Anchor
Second-row captain seat
Tether strap hook
Anchor
Third row seat
Tether strap hook
Anchor
| 19
Hide quick links:
Advertisement
Table of Contents
