Adjusting The Mirrors; Homelink ® Garage Opener - Honda Pilot 2016 Owner's Manual

VEHICLE CONTROLS

Adjusting the Mirrors

Adjust the angle of the mirrors for the best visibility when you are sitting in the
correct driving position.
Rearview Mirror with Day/Night Positions*
Manually adjust the position to reduce headlight
glare from vehicles behind you. Flip the tab to switch
between day and night positions.
Automatic Dimming Rearview Mirror*
When driving after dark, the automatic dimming
function reduces the glare from headlights behind
you.
The function cancels when the shift lever is in
Reverse (R).
Power Door Mirrors
Adjust the power door mirrors when the vehicle is on.
L/R selector switch: Select the left or right mirror.
After adjusting the mirror, return the switch to the
center position.
Mirror position adjustment switch: Press the switch
left, right, up, or down to move the mirror.
Folding door mirror button*: Press to fold the door
mirrors in or out.
Reverse Tilt Door Mirrors*
Either side door mirror can tilt downward when
you shift to Reverse (R) to improve visibility on the
selected side of the vehicle when reversing. The
mirror returns to its original position when you shift
out of Reverse.
When in Reverse, slide the selector switch to the
left or right side.
50 |
Tab
Day
position
Night position
Folding
Selector
button*
switch
Adjustment switch
Selector
switch
*if equipped
HomeLink Garage Opener*
®
Program your vehicle to operate up to three remote-controlled devices around
your home—such as garage doors, lighting, or home security systems—using the
buttons on the ceiling.
Models without
panoramic roof
Indicator
Training a Button
Park near the system you want to program, and follow the instructions in the
flowchart below.
1
Position the remote transmitter you wish
to link 1–3 inches (3–8 cm) from the
HomeLink button you want to program.
2
Press and release the desired HomeLink
button. Hold the button on the remote
transmitter.
Does the HomeLink indicator (LED) change
from slowly blinking to constantly on or
rapidly blinking? This should take less than
one minute.
NO YES
a
Press and release the HomeLink
button. Press and release the button on
the remote every 2 seconds.
Does the LED change from slowly blinking
to constantly on or rapidly blinking? This
should take less than one minute.
NO YES
To retrain a button or erase codes, see the Owner's Manual on the Owner
Information CD or at owners.honda.com (U.S.) or www.myhonda.ca (Canada).
If you need help, visit www.homelink.com or call (800) 355-3515.
VEHICLE CONTROLS
Models with panoramic roof
Buttons
Buttons
Indicator
3 Press and hold the programmed
HomeLink button for about a second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold the
complete
HomeLink button
again.
HomeLink indicator
HomeLink LED
rapidly blinks.
remains on.
a
The remote has a rolling code. Press the
"learn" button on the remote-controlled
device (e.g., garage door opener).
Within 30 seconds, press and hold the
b
programmed HomeLink button for
2 seconds.
Press and hold the HomeLink button
5
again; the remote-controlled device
should operate.
*if equipped
| 51