Table of Contents
Advertisement
14 Accord 4D TRG_TOURING_ATG_NEW STYLE 7/10/2013 9:38 AM Page 8
DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver's seat positions into memory for each corresponding keyless remote
transmitter (1 or 2).
How It Works
1. Turn on the vehicle. Make sure the
shift lever is in Park (P).
2. Adjust the seat to your preferred
position.
Note: Once set, stored positions can be recalled by pressing one of the
memory buttons (1 or 2) on the door.
12
3. Press SET. You will hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using within 5
seconds. You will hear two beeps.
ONE-TOUCH TURN SIGNAL
Use this quick and convenient method to signal a lane change.
How It Works
• Lightly push the turn signal lever up
or down for a three-blink sequence.
• For a continuous signal, push the
lever up or down until it locks into
place.
AUTO HEADLIGHTS WITH WIPER INTEGRATION
For your convenience, your vehicle's headlights automatically turn on when the
windshield wipers operate.
How It Works
Make sure your headlights are in
the AUTO position.
Turn on your windshield wipers.
The headlights also turn on.
When you turn off the windshield
wipers, the headlights turn off
shortly after.
13
Advertisement
Table of Contents
