Table of Contents
Advertisement
PDF created with pdfFactory trial version
User Manual version 2503
7. Insert the power cord (H) from the opening at the left
bottom side of the cabinet. Connect the power cord to the
power module and integrate the power module (I) to the left
bottom side of the cabinet with three TMS M3*6 screws.
8. Fix the HDD module (J) to the right bottom side of the
cabinet with three TMS M3*6 screws. Connect the big
4-pin power cable from the power module to the HDD.
9. Retain the media reader/CD-ROM module (K) to the
bottom of the cabinet with four TMS M3*4 screws.
10. Attach the plastic media reader bezel (M) to the Kiosk
cabinet front side and clip it into place.
(I)
(B)
(C)
(K)
(M)
F
3-14: K
E
IGURE
IOSK
NCLOSURE W MEDIA READER BEZEL
3-44
www.pdffactory.com
(J)
(E)
(D)
(A)
(G)
LIBRA 120 III (PC620 Intel 815E)
(F)
(H)
A
SSEMBLY
Advertisement
Table of Contents
