Table of Contents
Advertisement
PDF created with pdfFactory trial version
User Manual version 2503
After integrating the motherboard and touchscreen controller
to the reverse side of the display module, all the cable
connection needs to be done.
5.
There are three cables, touchscreen flat cable, LCD cable
and invertor cable coming out from the rear-side opening
of the LCD holder. Connect the other end of the
touschcreen flat cable to the 5-pin header connector,
the touchscreen controller. Connect the DF11-30 end of
the LCD cable to the
the 4-pin invertor cable to the motherboard's
6. For Elo resistive touch, the touchscreen cable is a ribbon
cable with 2*5 box headers at both side. Connect one end
to
P1
on the touchscreen controller with the other end
firmly plugged to the motherboard COM3.
7. There is a 2-pin (black & red) wire to provide the power
source for the touchscreen. Connect the 2-pin
touchscreen power wire to
the other end of plugged to the onboard CN1.
8. Connect one end of the 40-pin HDD ribbon cable to the
onboard IDE1.
9. Connect one the 40-pin end of the CD-ROM ribbon cable to
the motherboard
IDE2
10. There is a 4-pin CD audio-in wire to be plugged to
on the motherboard.
11. Connect the one end of the Y-shape USB cable the
onboard USB3 and USB1 connectors. The other ends are
for later connection to the exteriors of the Kiosk cabinet for
external USB devices.
3-28
www.pdffactory.com
LCD2
on the motherboard. Connect
P2
on the touch controller with
connector.
LIBRA 120 III (PC620 Intel 815E)
P5
on
INV1.
CD1
Advertisement
Table of Contents
