Epson PowerLite W16SK Setup Manual page 10

Connecting
Equipment
Connecting the
commander and the
receiver
You need to connect
a USB cable to link the
commander and the
receiver.
10 10 10 10 10
First, connect the power cables and the USB cable.
1 Plug in the power cables for the commander and the
receiver.
Commander
Power inlet
Power cable
Receiver
Power cable
Power inlet
2 Connect the commander's USB-A port to the receiver's
USB-B port with the supplied USB cable.
The projectors will not be linked if the wrong
USB ports are connected with the USB cable.
Commander
USB-A
Receiver
USB-B
USB cable