n
Removing the front panel assembly
Prior to performing the following procedures, remove
n
the top cover and both sides board.
Also remove the CD changer unit.
n
1. Disconnect the parallel wire and card wire from the
connectors CN702, CN701, CN703, CN850 on the
power amp and supply PCB.
2. Remove the two screws " H " retaining the front panel
assembly onto the bottom of the body.
3. Remove the screw " I " retaining the cassette deck
mechanism and then remove then GND lug " b " that
comes from the power amp and supply PCB.
4. Disengage the claws " c " on both sides at the bottom
of the front panel assembly and then remove the
assembly.
(See Fig.10 and 11)
1-9