Click Reset Statistics at the bottom to restore the values to zero and recount
them.
Click xDSL BER Test to test xDSL Bit Error Rate.
4.2.3.5 xDSL BER Test
Click xDSL BER Test to perform a bit error rate (BER) test on the DSL line. The
test page is as follows:
The Tested Time (sec) can be 1, 5, 10, 20, 60, 120, 180, 240, 300, or 360.
Note: If the BER reaches e-5, you cannot access the
Internet.
4.2.4 Route Table Information
Choose Device Info > Route and the following page appears.
Figure 9 ADSL BER test
16