Camera Recording - Panasonic PV-L352-K Operating Instructions Manual

Camera Recording

Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
b
a c
B
a d
D
, ,
Manual Easy Editing
For proper continuity when taping from
Stop mode or after attaching a new
Battery.
A
Set POWER to VCR.
B
a Press REWIND/SEARCH to rewind
a few seconds of tape.
b Press PLAY to review recording.
c Press STILL at the point where you
will want to continue the recording.
C
Set POWER to CAMERA.
D
Press RECORD/PAUSE to resume
recording.
18
03.L552-K(E)Basic p17-19
Stand-by Quick Release
If left in RECORD/PAUSE mode for 5
minutes, the Camcorder switches to Stand-by
mode to conserve battery power. When set to
ON, Stand-by Quick Release lets you resume
recording by pressing RECORD/PAUSE
twice. The default setting from the factory is
OFF mode.
1
Set POWER to
CAMERA.
2
Press MENU for
MENU mode.
2 3 4
, ,
Press UP or DOWN
to select
3
Press DISPLAY to select ON/OFF.
ON : From Stand-by mode, press
OFF : From Stand-by mode, set
1 b c
, , ,
A C
,
4
Press MENU to exit.
Easy Edit Stand-by
For a smooth transition between scenes if
recording is stopped, and then started within
24 hours.
a
Press RECORD/PAUSE to stop
recording.
b
Set POWER to OFF and leave cassette
in Camcorder.
c
To resume recording, set POWER to
CAMERA.
d
Press RECORD/PAUSE to resume
recording.
Note:
• Use Manual Easy Edit (left) if more than 24
hours has passed before recording was
resumed.
18
STAND-BY RELEASE .
RECORD/PAUSE twice to
resume recording.
POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
02.1.28, 2:27 PM