Table of Contents
Advertisement
Wing Part 1 (cont.)
23. Cut an opening using a
Dremel® tool in the rear spar for
the pushrods in all four wing pan-
els.
24. Make a mark on the top wing
skin to line up the servo arm.
One method is to use a combina-
tion square with piano wire.
Construction
25. Line up the servo control arm
with the mark and mount the ser-
vos in all four wing panels using
your favorite method.
Wing Mount
1. Slide the wing together using
the main wing joiner and fit the
wing to the fuselage. This may
require some custom filing and
sanding of the fuselage.
Note: The wing joiners may
need to be moved in or out of the
joiner socket in order for the
wings to slide together properly.
This is true for the main joiners
and tip joiners.
Page 9
Super XC
2. Once the wing fits nicely with
the fuselage, slide the main pan-
els apart and mark where the
front and rear wing saddles line
up with the wing.
3. Mark the middle of the wing
saddle location.
Advertisement
Table of Contents
