Setup; Conclusion - DG Airparts Super XC Instruction Manual

Competitive sailplane
Table of Contents

Advertisement

CG Location
The initial CG should be set at 27 1/2 inches from the fuselage nose. The final CG location can be adjusted to your
flying preferences through flight testing.
Control Throws
Ailerons:
5/16" up
3/16" down
Flaps:
1/8" up
90° down ( as much as possible with gap seal tape)
Elevator:
1/2" up
1/2" down
Rudder:
1 1/2" left
1 1/2" right
Suggested Settings
Flaps:
Mixed 25% of aileron travel
Lowered 1/4" for thermal camber
Lowered 1" for start/launch mode
Raised even with wing bottom for speed mode
Ailerons:
Mixed 100% with flaps for thermal camber
Lowered 3/16" down for start mode
Raised even with bottom of wing for speed mode
Elevator:
Mixed 3/16" down with 90° flaps for landing mode
Rudder:
Mixed 100% to aileron
The Super XC is a very competitive sailplane and has won many cross country contests. We hope you are very
satisfied with your Super XC. If you have any questions or suggestions about the sailplane or this manual, please
feel free to contact us.
DG Airparts, Inc.
501 Juanita Drive
Jacksonville, OR 97530
(541)899-8215
(541)899-7022 Fax
dean@xcsoaring.com or scott@xcsoaring.com

Setup

Conclusion

Page 21

Advertisement

Table of Contents
loading

Table of Contents