Select Water Level - Amana NAV-1 Use & Care Manual

Using the Controls – 2 Speed
Controls a t a glance
Dry er Exhaust tips
STEP 1

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
WATER LEVEL SETTING
Small
Medium
Large
Super
Note:
Items must circulate freely for best results.
5
Not es
LOAD SIZE
1/4 - 1/3
1/3 – 1/2
1/2 – 2/3
2/3 – Full
Combo Models
STEP 2
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water (select
models) for rinsing. Use the chart below as a guide.
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
Hot/Cold
items.
Moderately soiled, colored items.
Warm/Warm
Moderately soiled, colored items;
Warm/Cold
most permanent press items.
Brightly colored, lightly soiled
Cold/Cold
items; washable woolens.
Note:
In wash water temperatures below 60
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85
LOAD TYPE
° F,
°
F.