Mounting Bolt Location - LG LA090HVP Installation Manual

Single zone art cool gallery wall mount single zone art cool gallery wall mounted

Hide thumbs

Table Of Contents

Table of Contents

General Mounting

Securely attach the outdoor unit to a condenser pad, base rails, or

another mounting platform that is securely anchored to the ground

or building structure. Attach the outdoor unit with a bolt and nut on a

concrete or rigid mount. See Figure 3. Follow applicable local codes

for clearance, mounting, anchor and vibration attenuation require-

ments.

All referenced materials are to be field-supplied. Images are not to scale.

Mounting Platform

The underlying structure or foundation must be designed to support

the weight of the unit. Avoid placing the unit in a low lying area

where water may accumulate. When installing the outdoor unit on

the wall, or roof top, anchor the mounting base securely to account

for wind, earthquake or vibration.

Tie-Downs and Wind Restraints

The strength of the Duct-free Split Single Zone Inverter system

frame is adequate to be used with field-provided wind restraint tie-

downs. The overall tie-down configuration must be approved by a

local professional engineer.

Always refer to local code when designing a wind restraint system.

Snow and Ice Conditions

In climates that experience snow build-up, place the unit on a raised platform to ensure condenser airflow. The raised support platform must

be high enough to allow the unit to remain above possible snow drifts. Mount the unit on a field-provided snow stand at a minimum height

that is equal to the average annual snowfall plus 20 inches. Design the mounting base to prevent snow accumulation on the platform in front

or back of the unit case. If necessary, provide a field fabricated hood to keep snow and ice and/or drifting snow from accumulating on the coil

surfaces. Use inlet and discharge duct or hoods to prevent snow or rain from accumulating on the fan inlet and outlet guards. Best practice

prevents snow from accumulating on top of the unit. Consider tie-down requirements in case of high winds or where required by local codes.

When deciding on a location to place the outdoor unit, be sure to choose an area where run-off from defrost will not accumulate and freeze on

sidewalks or driveways.

GENERAL INSTALLATION GUIDELINES

Due to our policy of continuous product innovation, some specifications may change without notification.

Figure 3: Outdoor Unit Mounting Methods

Bolt

Placement

& Anti-Vibration

Pad

Foundation