Fitting Sfp Connectors - Optical Systems OSD2700F SERIES Operator's Manual

OPTICAL SYSTEMS DESIGN
3.2.5

FITTING SFP CONNECTORS

Care should be taken when inserting/removing the SFP connectors from SFP ports as SFP modules are
Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken when
installing. Ensure that the SFP is fully engaged and latched into position.
Inserting SFP – Ensure that the SFP lever is in the locked position and insert into appropriate SFP
port. Gently push the SFP until it locks into place. Remove plastic/rubber dust cap and fit fiber cable or
RJ45 plug.
Removing SFP – Remove fiber connector or RJ45 plug. Pull the SFP lever down to unlock SFP from
housing. Using the lever, gently pull the SFP out.
2
1
Fiber SFP
Inserting
Removing
SFP
SFP
2
1
Copper SFP
Inserting
Removing
SFP
SFP
FIGURE 8: FITTING/REMOVING SFP CONNECTORS
DOC ID: 10111504
PAGE 15
OSD2700F OPERATOR MANUAL