Table of Contents
Advertisement
1 QUICK START GUIDE
This quick start guide describes how to install and use the Managed Ethernet Switch.
1.1
FUNCTIONAL DESCRIPTION
•
RS-232 console, Telnet, SNMP v1 & v2c & v3, RMON, Web Browser, and TFTP
management.
•
Supports Command Line Interface in RS-232 console.
•
Supports 8192 MAC addresses. Provides 3M bits memory buffer.
•
Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 1000Mbps-full-duplex;
10/100Mbps-full/half-duplex; Auto MDI/MDIX.
•
100Base-FX: Multi mode SC or ST type, Single mode SC or ST type; 100Base-BX: WDM
Single mode SC type.
•
1000Base-SX/LX: Multi mode SC type, Single mode SC type; 1000Base-BX: WDM Single
mode SC type.
•
SFP socket for Gigabit fiber optic expansion.
•
Store-and-forward mechanism.
•
Full wire-speed forwarding rate.
•
AC inlet power socket: 90~264VAC, 50~60Hz internal universal PSU.
•
Supports redundant power supplies for flexible application.
•
-10
℃
to 60
℃
operating temperature range.
•
Metal case.
•
Supports Rack Mounting installation.
PAGE 5
OSD2700F OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
DOC ID: 10111504
Advertisement
Table of Contents
