Fitting Sfp Connectors - Optical Systems OSD2251P SERIES Operator's Manual

OPTICAL SYSTEMS DESIGN
2.2.9

FITTING SFP CONNECTORS

Care should be taken when inserting/removing the SFP connectors from SFP port 3 and 4as SFP
modules are Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken
when installing. Ensure that the SFP is fully engaged and latched into position.
Inserting SFP – Ensure that the SFP lever is in the locked position and insert into appropriate SFP
port. Gently push the SFP until it locks into place. Remove plastic/rubber dust cap and fit fiber cable or
RJ45 plug.
Removing SFP – Remove fiber connector or RJ45 plug. Pull the SFP lever down to unlock SFP from
housing. Using the lever, gently pull the SFP out.
2
1
Fiber SFP
Inserting
Removing
SFP
SFP
2
1
Copper SFP
Inserting
Removing
SFP
SFP
FIGURE 12: FITTING/REMOVING SFP CONNECTORS
DOC ID: 10115303
PAGE 17
OSD2251P OPERATOR MANUAL