Technical Summary; Brief Description; Preface; Overview - Optical Systems OSD2700F SERIES Operator's Manual

2 TECHNICAL SUMMARY

2.1

BRIEF DESCRIPTION

2.1.1

PREFACE

This manual describes how to install and use the OSD2700F Managed Ethernet Switch. The
OSD2700F switch is designed to deliver full scalability with SNMP/RMON web-based management
functions. To get the most out of this manual, you should have an understanding of Ethernet
networking concepts.
2.1.2

OVERVIEW

The OSD2700SFP is a managed 24-port 100BaseT and 4-port Gigabit Ethernet switch designed to
operate in tough industrial applications providing real-time redundant performance. The four 1000Base
RJ45 copper ports and four Gigabit SFP ports are combo ports - It is possible to use either the RJ45
port of the SFP port per channel (G1, G2, G3, G4). ie It is not possible to use both at the same time.
SFPs are sold separately.
The unit will operate on either 1310nm and/or 1550nm singlemode. Operation over at least 40km of
singlemode fiber is possible by use of the appropriate SFP optical devices. It normally requires two
fibers per SFP port but is optionally available for one fiber operation.
A major benefit of the OSD2700F is its reliable and consistent performance over the -10°C to +60°C
temperature range that allows it to be used in uncontrolled environments such as roadside cabinets,
mine sites and factories.
2.1.3

APPLICATIONS

▲ Any network utilising a mix of copper
and fiber
▲
Industrial IP communications
2.1.4

FEATURES AND BENEFITS

▲ Complies with IEEE802.3i/802.3u/
802.3ab 10/100/1000Base-T,
IEEE802.3z 1000Base-LX standards.
▲
Supports RSTP/MSTP/STP for
Ethernet redundancy IP Multicast
Filtering through IGMP Snooping V1,
V2 & V3
▲ Supports port-based VLAN and
IEEE802.1Q VLAN Tagging and
GVRP
▲ IEEE802.1p QoS with four priority
queues
▲ MAC-based trunking with automatic
link fail-over
▲ RS232 console, Telnet, SNMP V1,
V2c & V3, RMON, Web Browser,
and TFTP Management
PAGE 9
OSD2700F OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
▲ Self-healing Gigabit Ethernet
backbone networks
▲
Gigabit Combo ports: copper (RJ45)
or fiber (SFP)
▲ Full wire-speed forwarding rate
▲ Supports IEEE802.1x Security
▲ Bandwidth Rate Control
▲ Per-port programmable MAC address
locking
▲ Up to 24 Static Secure MAC
addresses per port
▲ Port mirroring
▲ Supports NTP
▲ SFP modules sold separately
▲ 1000Mbps-Full-duplex, 10/100Mbps-
Full/Half-duplex, Auto-Negotiation,
Auto-MDI/MDIX
▲
Operates over the temperature range
of -10°C to +60°C
DOC ID: 10111504