Connecting A Smart Phone And A Tablet Terminal - NEC UM351W User Manual

Connecting a smart phone and a tablet terminal

The below mentioned feature is available when the projector is connected with MHL supported devices such as a
smart phone and a tablet terminal by a MHL cable (not supplied)
• Projecting a image and a file on the MHL supported devices.
• Output sound on the MHL supported devices from the build-in speaker.
• Charge the MHL supported devices.
• Operate the MHL supported devices by the remote control for the projector.
• Operate the projector by the MHL supported devices
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
HDMI 1/MHL IN
NOTE:
• Please use the MHL cable (not supplied) that meets the standard.
If the cable that does not meet the standard is used, it may be cause of fire, injury or damage of property around during charging
the MHL supported devices.
• If MHL-HDMI adaptor is used, it may disable to charge/operate the MHL supported devices by the remote control of the projec-
tor.
• If image can not be projected correctly, pull out the MHL cable once and put it back again.
• Depending on types and setting of smart phones and tablets, image may not be projected correctly.
Information
• In the below mentioned conditions, the MHL supported devices are not charged
- When the projector is in STANDBY mode
- When the MHL supported devices are discharged completely.
- When supply current is over consumption current.
MHL cable (not supplied)
Micro USB cable / to the double use terminal as
SOURCE button on the projector
cabinet
HDMI1/MHL
6. Installation and Connections
power source
MHL supported devices
Button on the remote control
112
(HDMI1/MHL*)