NEC UM351W User Manual page 60

SITE SURVEY
SECURITY TYPE
INDEX
KEY
• NAME
PROJECTOR NAME
HOST NAME
DOMAIN NAME
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you
can access.
Turn on or off the encryption mode for secure transmission. When turn on the encryp-
tion mode, set WEP key or encrypted key.
DISABLE Will not turn on the encryption feature. Your communications
may be monitored by someone.
WEP 64 bit Uses 64-bit datalength for secure transmission.
WEP 128 bit Uses 128-bit datalength for secure transmission.This option will
increase privacy and security when compared to use of 64-bit
datalength encryption.
WPA PSK-TKIP/ These options provide stronger security than WEP.
WPA PSK-AES/
WPA2 PSK-TKIP/
WPA2 PSK-AES
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in
your wireless network.
• When you use WEP, your image transmission speed will slow down.
Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY
TYPE].
WEP key is fixed at "1" either WEP64bit or WEP128bit is selected as SECURITY
TYPE.
When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]:
Enter WEP key.
Select Characters (ASCII)
WEP 64 bit Up to 5 characters
WEP 128 bit Up to 13 characters
When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2
PSK-AES]:
Enter encryption key. Key length must be 8 or greater and 63 or less.
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
15 or less.
Enter the domain name of the network connected to the projector. A domain name
must be 60 characters or less.
49
3. Convenient Features
Hexadecimal digit (HEX)
Up to 10 characters
Up to 26 characters