American Megatrends Atlas PCI-II User Manual page 22

Step 3 Install Memory,
Configure Cache Memory
!
Before inserting the cache module:
•
turn the computer off,
•
make sure you follow all antistatic procedures,
•
disable SMT cache by shorting Pins 2-3 of J30, and
•
use only COAST 1.0-compliant cache modules.
16 Atlas PCI-II Motherboard User's Guide
Continued
, cont'd
Specify the size of L2 secondary cache memory as
shown in the following chart. Make sure you also
set the Cache Module Type option in WINBIOS
Setup Chipset Setup. In the following drawing, Pin 1
of J16, J26, and J28 is represented by a square.
Important
Cont'd