Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker cordless hand-held saw has been sense when operating a power tool. Do not use a power designed for sawing wood and sheet metal. This tool is tool while you are tired or under the influence of drugs, intended for consumer use only.
Keep cutting tools sharp and clean. Properly maintained Keep blades sharp. Dull or damaged blades may cause cutting tools with sharp cutting edges are less likely to bind the saw to swerve or stall under pressure. Always use the and are easier to control. appropriate type of saw blade for the workpiece material g.
When assessing vibration exposure to determine safety Electrical safety measures required by 2002/44/EC to protect persons This tool is double insulated; therefore no earth regularly using power tools in employment, an estimation of wire is required. Always check that the power vibration exposure should consider, the actual conditions of supply corresponds to the voltage on the rating use and the way the tool is used, including taking account of...
The charging indicator (9) will be lit as long as the When the tool is running, release the switch lock-off battery pack is connected to the plugged-in charger. button (1). The tool will continue to run while the on/off Charge discharged batteries within 1 week. Battery life trigger switch (2) is pressed.
Maintenance Warning! Inspect the work site for hidden gas pipes, water pipes, or electrical wires before making blind or plunge cuts. Your Black & Decker tool has been designed to operate over Failure to do so may result in explosion, property damage, a long period of time with a minimum of maintenance.
Protecting the environment Technical data VPX1301 Separate collection. This product must not be Voltage Vdc 7 disposed of with normal household waste. No load speed spm 1950 Should you find one day that your Black & Decker product Stroke length...
The product has been used for trade, professional or hire purposes. The product has been subjected to misuse or neglect. The product has sustained damage through foreign objects, substances or accidents. Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.