Downflow Zero-Clearance - Rheem R95P Installation Instructions Manual

DOWN FLOW ZERO CLEARANCE DOWN FLOW ZERO CLEARANCE DOWN FLOW ZERO CLEARANCE DOWN FLOW ZERO CLEARANCE
PARTS NEEDED: PARTS NEEDED: PARTS NEEDED:
FROM PARTS BAG(PROVIDED W/UNIT) FROM PARTS BAG(PROVIDED W/UNIT) FROM PARTS BAG(PROVIDED W/UNIT)
INTAKE
COUPLING COUPLING
W/ NUT
FROM CONVERSION KIT RXGY-CK FROM CONVERSION KIT RXGY-CK
(X4)
#8 X 1/2" #8 X 1/2"
2-5/8" FLUSH
SCREW SCREW
MOUNT PLUG
FROM ZERO-CLEARANCE CONVERSION KIT RXGY-ZK FROM ZERO-CLEARANCE CONVERSION KIT RXGY-ZK
(X10)
#8 X 1/2"
SCREW
TOOLS/MATERIALS NEEDED: TOOLS/MATERIALS NEEDED: TOOLS/MATERIALS NEEDED:
3/16" DRILL BIT
ELECTRIC DRILL
1/8" DRILL BIT PLIERS
NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE NOTE: THESE CONVERSION INSTRUCTIONS ARE INTENTIONALLY GENERIC, SOME PARTS MAY BE DIFFERENT IN YOUR FURNACE
NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION" NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION" NOTE: STEPS 1- 4 SHOWN WITH FURNACE IN "AS SHIPPED CONDITION"
1
1a
1b
1a - REMOVE ELBOW, (2) COUPLINGS, AND FLUE TRANSITION. 1a - REMOVE ELBOW, (2) COUPLINGS, AND FLUE TRANSITION.
(RETAIN ELBOW AND COUPLINGS FOR LATER USE.) (RETAIN ELBOW AND COUPLINGS FOR LATER USE.)
(NOTE: REMOVE COUPLING ON INDUCER WITH ELBOW (NOTE: REMOVE COUPLING ON INDUCER WITH ELBOW
FOR EASIER REMOVAL).
1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE. 1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE. 1b - REMOVE TRAP AND HOSES. RETAIN HOSE D FOR LATER USE.
(NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL STRAIGHT OUT). (NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL STRAIGHT OUT). (NOTE: TO REMOVE TRAP REMOVE (2) SCREWS AND PULL STRAIGHT OUT).
(X2)
BULKHEAD #8 X 1/2"
COUPLING SCREW
1/4" BLACK 5/8" DRAIN
VENT TUBING HOSE B
(X2)
PIPE
COLLAR/GASKET
ASSEMBLY
TUBING CUTTER
1/4" HEX HEAD DRIVER 1/4" HEX HEAD DRIVER
5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER 5/16 HEX HEAD DRIVER
FLUE TRANSITION (DISCARD) FLUE TRANSITION (DISCARD)
TRANSITION TRANSITION
COUPLING COUPLING
(RETAIN) (RETAIN)
ELBOW "RETAIN" ELBOW "RETAIN"
IDB COUPLING IDB COUPLING
(RETAIN) (RETAIN)
VENT HOSE VENT HOSE
(RETAIN) (RETAIN)
HOSE "D" HOSE "D"
(RETAIN) (RETAIN)
PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS PARTS NEEDED FOR THIS CONVERSION REQUIRE ITEMS
! !
FROM THE PARTS BAG FROM THE PARTS BAG PARTS BAG, CONVERSION KIT RXGY-CK PARTS BAG, CONVERSION KIT RXGY-CK
YOU MUST HAVE THE OUTLINED PARTS FROM THESE KITS BEFORE PROCEEDING. YOU MUST HAVE THE OUTLINED PARTS FROM THESE KITS BEFORE PROCEEDING. YOU MUST HAVE THE OUTLINED PARTS FROM THESE KITS BEFORE PROCEEDING.
(X2)
HOSE
ALTERNATE DRAIN ASSEMBLY ALTERNATE DRAIN ASSEMBLY
CLAMP
.559" CONDENSATE .559" CONDENSATE
TRAP DRAIN PLUG TRAP DRAIN PLUG
INTAKE INTAKE
PIPE
2
INSTALL
2a 2a
2-5/8"
2d
DISCARD
2b
2a - INSTALL 2-5/8" FLUSH MOUNT PLUG. 2a - INSTALL 2-5/8" FLUSH MOUNT PLUG.
2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD. 2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD. 2b - REMOVE LEFT 2-3/8" FLUSH PLUG IN BLOWER SHELF - DISCARD.
2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM BLOWER SHELF TO 2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM BLOWER SHELF TO 2c - RELOCATE RIGHT 2-3/8" FLUSH MOUNT PLUG FROM BLOWER SHELF TO
TOP PLATE. TOP PLATE.
2d - RELOCATE .403" DRAIN PLUG IN THE COLLECTOR BOX. 2d - RELOCATE .403" DRAIN PLUG IN THE COLLECTOR BOX. 2d - RELOCATE .403" DRAIN PLUG IN THE COLLECTOR BOX.
AND RXGY-ZK AND RXGY-ZK.
INTAKE AIR
TUBE C
DIFFUSER
CONDENSATE
1/2" DRAIN
TRAP BRACKET
HOSE E
(DOWN FLOW)
FLUE PIPE FLUE PIPE
ASSEMBLY ASSEMBLY
W/ O-RING W/ O-RING
PVC GLUE AND PRIMER PVC GLUE AND PRIMER
HAMMER
FLAT HEAD SCREWDRIVER FLAT HEAD SCREWDRIVER
ST-A1194-31-02
O-RING O-RING
2c
23