Programming Homelink; For U.s.a. Owner’ S; Programming An Entry Gate (For U.s.a. Owners)/Programming A Device In The Canadian Market - Lexus 2016 IS 200t Service Manual

Programming HomeLink

■
Point the remote control transmit-
1
ter for the device 1 to 3 in. (25 to
75 mm) from the HomeLink
buttons.
Keep the HomeLink
in view while programming.
For U.S.A. owner' s

Press and hold the HomeLink
2
button you want to program and
the handheld transmitter button
simultaneously.
®
HomeLink
changes from a slow to a rapid
flash, you can release both but-
tons.
Programming has completed when the indicator light changes to a rapid flash.
Programming an entry gate (for U.S.A. owners)/Programming a device in the

Canadian market
With one hand, press and hold the HomeLink
2
gram. With your other hand, press and release the remote control transmit-
ter every 2 seconds and repeat this cycle until the HomeLink
light starts to flash rapidly. Then, release the buttons.
Test the HomeLink
3
pressing the newly programmed
button and observing the indica-
tor light:
If the indicator light is solid/
●
continuous, programming has
been completed and your
device should activate when
the HomeLink
pressed and released.
If the indicator light blinks rapidly for 2 seconds and then turns into a
●
solid/continuous light, proceed with the following instructions
programming a rolling code system.
IS350/300/200t_U (OM53D18U)
6-4. Using the other interior features
®
®
®
indicator light
®
When the
indicator light
®
operation by
®
button is
393
®
button you want to pro-
®
indicator
for
4
6