Vertex Standard EVX-534 Operating Manual page 36

EVX-539. Important Note: the deleted Contact
Alias can not be restored, and you can not delete
the Contact Alias which determined by the CE151
Programming Software.
Press the [ D ] key, the display indicates "Delete.
Yes/No"("Yes" is blinking). Press the [ D ] key
again, the display indicates "-Saved-" briefly,
then reverts to first Contact Alias of the contact
list. You may cancel the deleting the Contact
Alias by pressing the [ C ] key.
Radio.Check: You may check the radio status of
the selected Contact Alias.
Press the [ D ] key to transmit the radio status com-
mand to the designated radio. If the designated
radio is alive, the designated radio transmits the
ACK command, and then your radio's display
indicates "Ack.Receive". If not, your radio's dis-
play indicates "No.Response".
Radio. Monitor: You may monitor the situation
around the designated radio by remote control.
Press the [ D ] key to remote-control the desig-
nated radio. If the designated radio is alive, the
designated radio will automatically transmit for
34
a o
DVanceD peration
the programmed period to transmit the situation
around the radio to you. Your radio's display in-
dicates "Ack.Receive", and outputs the situation
around the designated radio from the speaker. If
the designated radio is not alive, your radio's dis-
play indicates "No.Response" and no responses.
Revive: You may revive the stunned radio by re-
mote control.
Press the [ D ] key to transmit the revive command
to the stunned radio. When the stunned radio
receives the revive command, the stunned radio
revives, and then transmits the ACK command
automatically. Your radio's display indicates "Ack.
Receive". If your radio's display indicates "No.
Response", the revive command did not succeed.
Stun: You may stun the designated radio forcibly
by remote control.
Press the [ D ] key to transmit the stun command
to the designated radio. If the designated radio
is alive, the designated radio transmits the ACK
command and stuns it. If not, your radio's display
indicates "No.Response", the stun command did
not succeed.
EVX-534/-539 O
pErating
M
anual