Sql Level; Beep Off; Af Minimum Volume - Vertex Standard EVX-534 Operating Manual

sql l
eVel
You can manually adjust the squelch level using this
function:
r Press, (or press and hold), the assigned PF key. A
tone will sound, and the current squelch level will
appear on the display.
r Press the SIDE-1/SIDE-2 buttons (or [ A ] / [ B ]
keys) to select the desired squelch level. Available
selections are "Open", "Threshold", "Normal"
and "Tight".
r Press the [ D ] key to store the new setting. The
display indicates "-.Set.-" briefly, then reverts to
the normal channel indication.
You may cancel the new setting by pressing
the [ C ] key. In this case, the display indicates
"-.Cancel.-" briefly.
22
a o
DVanceD peration
b
eep
Press, (or press and hold), the assigned PF key to
disable the radio beeps temporarily. Press again, (or
press and hold again), the assigned PF key to enable
the radio beeps.
When the Beep Off function is "on" and "off", the
display indicates briefly "Beep. OFF" and "Beep.
ON".
Note: if the Channel Announcement feature is acti-
vated, the Channel Announcement also disables and
enables when the Beep Off function is "on" and "off".
aF M
Press, (or press and hold), the assigned PF key, the
display indicates "AF.ATT. ON" briefly, and reduce
the audio output to the (lower) level programmed.
Again press, (or press and hold), the assigned PF key,
the display indicates "AF.ATT.OFF" briefly, and re-
sume normal audio output level. You may change the
programmed (lower) level by the "User Set (Menu)"
mode. See page 42 for more information.
oFF
V
iniMuM oluMe
EVX-534/-539 O
pErating
M
anual