Searching Your Favorite Tracks; (Ams (Automatic Music Scan) Play); Quick Replay; About The Text Information - Marantz SA-11S1 User Manual

To Check the Programmed Tracks
Press the button on the remote
RECALL/SCROLL
control during the program or when the program is
stopped ("PROG" lights up).
Every time press
RECALL/SCROLL
programmed tracks will be displayed one after the
other in order.
To Delete a Programmed Track
q Press
button in stop mode when program
CANCEL
has been made (When "PROG" indicator is
lighting up).
w Every time press
button, the programmed
CANCEL
tracks are deleted in order from the last track
programmed.
Also, the deleted track's track number indicator
will disappear.
To Clear Whole Program
Press button two times while in program
STOP
play. In the stop mode, press
STOP
Program can also be cleared by pressing
key to open the disc tray.
OPEN/CLOSE
To Add Tracks to Program
Tracks can be added to the end of program when
program is remaining ("PROG" indicator is lighting
up) and in stop mode.
However tracks cannot be added to the program
when the RNDM (random) indicator is lit up.
* Please be careful about the following matters.
• When programming 1st through 9th tracks in a
disc that has over 10 tracks by using numeric
buttons. For instance, programming the 3rd track
after programming the 1st track, press 3 button
more than approximately 1.5 seconds after 1
button is pressed. When a program is finalized,
the time is updated.
• Likewise, when programming a track at 10th or
after. For example, to program 13th track, press
3 button within approximately 1.5 seconds after
1 button is pressed.
• When programming a track in a disc that has less
than 9 tracks. For instance, to program the 5th
track after 4th track has been programmed, press
5 button more than approximately 0.5 second after
4 button is pressed.
12
Q&A
• How many tracks can be programmed?
button, the Up to 30 tracks can be programmed for
program play.
• Can I listen to program play repeatedly?
Press button once. "
REPEAT
indicator will light and program play will
be repeated.
• Can I shuffle the programmed track order?
Press button in stop mode.
RANDOM

SEARCHING YOUR FAVORITE TRACKS

button once.

(AMS (AUTOMATIC MUSIC SCAN) PLAY)

This feature is convenient to search where your
favorite track is.
If the button is pressed while a track is
AMS
stopped, the AMS indicator lights up, and the first
ten seconds of each track on the disc will be played
starting from the first track.
Also, if the button is pressed during playback,
AMS
the AMS indicator lights up, and the program jumps
to the next track after approximately 10 seconds
elapses on the display time.
Light up
Once you find a song that you want to listen to, press
the button again or press the
AMS
The AMS indicator turns off, and normal playback
resumes from the current track.
* If the button is pressed after the tracks are
AMS
programmed, only the programmed tracks are
played by AMS.

QUICK REPLAY

When QUICK REPLAY button is pressed during
playback, the unit goes back to the amount of time
set by the MENU and starts playback from there.
* Playback that goes beyond the track is not allowed.
Also, when the total time of the track being played
is shorter than the time set for quick replay, or when
the playback time is shorter than the time set for
" "ALL"
quick replay, if
QUICK REPLAY
the track will be goes back to the start of that track
and playback is started from there.
To Set Quick Replay Time
q If a disc is loaded in the disc tray, eject the disc
and close the tray.
w Press the
button on the remote control.
MENU
e Press the
ENTER button on the remote control
while Quick Replay is displayed (approx. 3
seconds). The current time setting appears on the
LCD. (The default setting is 10 seconds.)
r Use the
or button to set the time. (5 to
60 seconds)
t After making the setting, press the
twice. The LCD returns to the normal display.
y The time setting is retained even when the power
is turned off.
button.
PLAY
Caution:
* When there is no key input for about 3 seconds
during this series of operations, the setting will be
configured to the conditions at that time and the
display will return the time display.

ABOUT THE TEXT INFORMATION

DISPLAY

The following items of text information in Super Audio
CD discs can be displayed by pressing
on the remote.
Never theless, which items of information are
recorded depends on discs so some information may
not be displayed. This unit skips unrecorded
information to display.
button is pressed,
• During playback
When button is pressed on the remote, "Track
TEXT
Title" of the currently playing will be displayed.
• In Stop Mode
Each time button on the remote is pressed,
TEXT
text information will be displayed in the following
order.
Time Display
Album Title
Album Artist
• This unit can display 12 characters in one time. If
information is longer than 12 characters, the
display will scroll right to left.
• This unit can display only alphabets, numeric
numbers and symbols. Chinese and Japanese
characters cannot be displayed. If information is
button
MENU
in Chinese and Japanese characters, the unit
displays nothing.
button
TEXT