Before Using; Equipment Mains Working Setting; Copyright; Inappropriate Places For Installation - Marantz CD6002 User Manual

FEATURES
• The text information, such as ID3 tag information
and file names that are displayed during
playback of MP3s, support English alphanumeric
characters only.
• When playing variable bit rate files, it is possible
that the playing time may not be displayed
accurately.
• When writing onto CD-R or CD-RW discs,
please use either ISO9660 mode 1 or ISO9660
mode 2-disc format. Multi-session recording is
also supported enabling the playing of data that
have been added to a disc.
• MP3/WMA files that have been recorded by
"packet writing" cannot be played back.
• Depending on the condition of the recorded data,
it may take some time to read song information.
• In the case of an Enhanced or Mixed Mode CD
having combined audio format CD-DA along with
MP3/WMA files, only the CD-DA audio portion
will be played.
• The playback of WMA DRM (Digital Rights
Management) files is not supported by this
player.

BEFORE USING

This section must be read before any connection is
made to the mains supply.
EQUIPMENT MAINS
WORKING SETTING
Your Marantz product complies with the household
power and safety requirements in your area.
This product can be powered by 230 V AC only.

COPYRIGHT

Recording and playback of any material may
require consent. For further information refer to the
following:
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— any subsequent statutory enactments and
orders
INAPPROPRIATE PLACES
FOR INSTALLATION
To keep your player in perfect working order for the
longest possible time, avoid installing the player in
the following locations.
• Wherever it will be exposed to direct sunlight
• Wherever it will be close to a heater or other
heat-radiating appliance
• Wherever the humidity is high or ventilation is
poor
• Wherever it is very dusty
• Wherever it will be subject to vibration
• On top of a rickety stand or in an unstable
location which is tilted at an angle
• On top of an amplifier or other component which
dissipates a great deal of heat
• In an audio rack with little space at the top
and bottom or other location where the heat
dissipation will be obstructed
To ensure proper heat dissipation, install the
player while leaving clearances between the
player and wall or other components, as shown
in the figure below.
0.1 m or more
0.1 m or more
0.1 m or more
0.1 m or more
DO NOT PLACE OBJECTS
ON TOP
• Refrain from placing any objects on top of the
player.
CAUTIONS ON HANDLING
MAINS CORD
• Do not touch the mains cord with wet hands.
• When disconnecting the mains cord, always
make sure that you take hold of the plug. Yanking
out or bending the cord can damage it and/or
cause electric shocks or a fire.
• Get into the habit of disconnecting the power
plug before leaving home.
DO NOT ATTEMPT REPAIRS
YOURSELF
• Refrain from lubricating the player: doing so can
cause malfunctioning.
• Only qualified engineers with specialized
expertise are authorized to repair the pick-up
and parts inside the player.
3