Care & Cleaning - Breville Gourmet Baker BBM400 Instruction Book

Care & Cleaning
CLEANING THE STAINLESS
STEEL HOUSING
1. Wipe the exterior of the stainless steel
housing and the LCD screen with a soft,
damp cloth. A non-abrasive liquid cleanser
or mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to the
sponge, not the outer surface or LCD screen,
before cleaning. Do not use a dry paper
towel or cloth to clean the LCD screen, or
use an abrasive cleanser or metal scouring
pad to clean any part of the bread maker as
these will scratch the surface.
WARNING
Never immerse the stainless steel housing in
water or place in the dishwasher. Take care not
to allow water or cleaning fluids to seep under
the buttons or LCD screen on the control panel.
2. Ensure the bread maker is turned OFF
by pressing and holding the START |
CANCEL button. Remove the power
plug from the power outlet. Allow the
bread maker and all accessories to cool
completely before disassembling and
cleaning.
3. If over-spills such as flour, nuts, raisins
etc. occur in the interior baking chamber,
carefully remove them using a soft, damp
cloth. Use extreme caution when cleaning
the heating elements. Ensure the bread
maker is completely cool then gently rub
a soft, damp sponge or cloth along the
length of the heating element. Do not use
any type of cleanser or cleaning agent.
4. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet.
a) The fruit and nut dispenser can be removed
from the lid for cleaning.
b) Close the base from inside the lid and pull
the fruit and nut dispenser straight out of
the lid. This can now be wash with warm
soapy water and dry thoroughly.
NOTE
Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet.
Never wash the fruit and nut dispenser in the
dishwasher.
CLEANING THE BREAD & CAKE PAN
1. Half fill the bread pan with warm soapy
water. A non-abrasive liquid cleanser or
mild spray solution may be used. Allow to
stand for 10–20 minutes.
NOTE
Do not immerse the outside of the bread pan
and cake pan in water as this may interfere
with the free movement of the wingnut and
drive shaft. Wash only the interior of the
bread pan.
2. Remove the paddle and wash the inside
of the bread pan and cake pan with a soft
cloth. Do not use an abrasive cleanser or
metal scouring pad as these will scratch the
non-stick coating. Ensure there is no
baked-on residue or dough on the drive
shaft. Rinse thoroughly.
3. Let all surfaces dry thoroughly prior to
inserting into the stainless steel housing.
NOTE
Some discolouration may appear on and inside
the bread pan over time. This is a natural effect
caused by moisture and steam and will not
affect the bread in any way.
The inside of the bread pan is coated with
a high quality non-stick coating. As with any
non-stick coated surface, do not use abrasive
cleansers, metal scouring pads or metal
utensils to clean these items as they may
damage the finish.
Never wash the bread pan and cake pan in the
dishwasher.
21