Active Products PW0501400 Instruction Manual

Active Products PW0501400 Instruction Manual

1200 everyday pressure washer

Advertisement

1200
EVERYDAY

PRESSURE WASHER

Instruction Manual
Model: PW0501400
If you have any questions or comments, please call our toll free
1-866-924-7626
PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT.
BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY AND
RETAIN IT FOR FUTURE REFERENCE.
IF YOU MUST STORE YOUR PRESSURE WASHER IN A PLACE WHERE TEMPERATURE IS
BELOW 5ºC,
YOU MUST APPLY WINTERIZING PROCEDURE TO PROTECT IT. FAILURE TO
WINTERIZE THE UNIT MAY PERMANENTLY DAMAGE PUMP AND VOID THE WARRANTY.
WARRANTY REGISTRATION BY INTERNET, WWW.ACTIVEPRODUCTS.COM.
PW0501400CA_11/2006_REV.2

Advertisement

Table of Contents
loading

Summary of Contents for Active Products PW0501400

  • Page 1: Pressure Washer

    1200 EVERYDAY PRESSURE WASHER Instruction Manual Model: PW0501400 If you have any questions or comments, please call our toll free 1-866-924-7626 PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Warranty ..........Precautions .
  • Page 3: Warranty

    • Any non-standard or bonus accessory/attachement included with the original product. Active Products shall in no event be liable for injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of this product. This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents;...
  • Page 4: Precautions

    IMPORTANT PRECAUTIONS – READ FIRST! Safety Warnings Warnings Do not use with flammable liquids and toxic When using this product, basic precautions should • chemicals. always be followed: Injection Hazard: Equipment can cause serious • Read all the instructions before using the product. •...
  • Page 5: Safety Features And Electrical Power Information

    SAFETY FEATURES AND ELECTRICAL POWER INFORMATION The pressure washer is equipped with a stop Extension Cords device that will sense when the trigger on the gun If possible, do not use extension cords with this is released. It will open the power circuit to the motor product.
  • Page 6: Parts Diagram And List

    PARTS DIAGRAM AND LIST Parts List Item no. Quantity Part Name Parts No. Pressure washer JH03-001-0000 Water filter JH03-000-0001 Quick-connect coupling & inlet adaptor JH03-050-0000 Gun assembly & pressure hose JH03-090-0000 Adjustable wand JH03-091-0000...
  • Page 7: Assembly And Operating Instructions

    ASSEMBLY AND OPERATING INSTRUCTIONS Water Supply (cold Water Only) Caution Do not draw non-water liquids through the unit. For • use with cold water supply only. • Never use the pressure washer to draw Water hose must be at least a 1/2” in diameter. •...
  • Page 8 ASSEMBLY AND OPERATING INSTRUCTIONS – continued Fig.4 Step 4 Attach the high-pressure hose to the water outlet. Twist tightly to avoid leakage. Fig.5 Fig.6 Step 5 Step 6 Attach garden hose to water supply and turn Plug the unit into an outlet. water on.
  • Page 9 ASSEMBLY AND OPERATING INSTRUCTIONS – continued Fig.7 Step 7 Before turning the unit ON, depress the trigger to bleed any trapped air out of the pump and hose. Fig.8 Step 8 Start the pressure washer by turning ON/OFF switch to ON. Surface Preparation Before starting any cleaning task, it is important to inspect the area for objects which could create a hazard.
  • Page 10: Using The Accessories

    USING THE ACCESSORIES Fig.9 Adjusting The Spray Caution The adjustable spray nozzle can be adjusted from fan to jet. The spray is adjusted from jet Jet spray adjustment is very aggressive. to fan spray by turning the nozzle as shown in Do not adjust while spraying.
  • Page 11: Shut Down And Clean-Up

    SHUTTING DOWN AND CLEANING UP Step 1 Step 4 Turn the switch to “OFF” (0) position and unplug cord Disconnect the garden hose from the water inlet on from outlet. the unit. Step 2 Step 5 Turn off the water supply. Disconnect the high-pressure hose from the high- pressure outlet and engage the gun safety lock.
  • Page 12: Winterizing And Long-Term Storage

    WINTERIZING AND LONG-TERM STORAGE Optimum Winterizing Procedure Alternative Procedure Winterizing your pressure washer will help protect If you cannot do the Optimum Winterizing pro- and prolong its life. It is strongly recommend you cedure, you can still protect your pressure washer follow the below steps using pump saver.
  • Page 13 USER MAINTENANCE Connections Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with non-water soluable grease. Fig.11 Fig.12 Water Filter Screen Adjustable Nozzle When the nozzle is clogged, it will cause the pump The pressure washer is equipped with a water inlet to build pressure and may cause the unit to surge.
  • Page 14 TECHNICAL SPECIFICATIONS Specifications Pump Pressure: 900 PSI Max. Pressure: 1200 PSI Water Flow Rate: 1.3 GPM Power Source Requirement: 120 V, 15 A, 60 Hz Electrical cord: 23’ High-pressure hose: 17’ Current Drawn: 11 A Water supply: Cold tap water...
  • Page 15: Troubleshooting

    TROUBLESHOOTING Disconnect the machine from the power source before making any repair. Symptom Cause Solution Motor will On/Off switch is in the Turn switch to the “ON” ( | ) position. not start. “OFF” (O) position. Power cord is not plugged in. Plug in power cord.
  • Page 16 TROUBLESHOOTING – continued Symptom Cause Solution Garden hose Loose fittings. Tighten fittings. connection leaks. Missing/worn rubber washer. Insert new washer. Spray wand, or Spray nozzle not properly attached. Insert the spray nozzle into the trigger extension, or gun. Carefully press in against the nozzle leaks.

Table of Contents