Inter-m AOE-212N Operation Manual page 12

AUDIO OVER ETHERNET
4. Serial Setup(232)
Content
Setting
Baud Rate
Connection
Port
IP Address
Run
Serial service
Run
Set
Clear
AOE-212N
10
Setup the property of serial communication (RS-232C).
Setup the communication speed of serial port. Scope is
2400bps~115200bps.
Connection setup to transmit the serial communication.
Default port value to transmit the serial communication.
Setup the IP address to receive the serial communication.
Setup the Run of serial communication receiving.
Setup to transmit the serial communication to other AOE-212N.
Sets 'Run' to begin serial communications transmission. The
equipment list of equipment being sent to the serial communication
serial server run-time will be displayed.
Apply and save the changed contents by using the
button after changing the setup of SET device.
Restore all setups to default values by using
Default
button.
Value
9600
5455
192.168.1.99