Table of Contents
Advertisement
Fuzzy Detection of the load
During the heating step in the main wash two measurements are taken to
determine if the machine is washing a full or half load.
The first measurement takes place 13 minutes after the start of the heating step
and the second measurement is taken 10 minutes later, (23 minutes into
heating).
If a half load is detected the following occurs:
Main wash time reduced by between 4 and 6 minutes, (depending on the
program).
No second rinse in the INTENSIVE 70º program.
The rinses could be reduced by approximately 2 minutes.
The temperature of the last hot rinse reduced by 5º. ( This does not apply to
the Auto bio 50º and the Normal bio 50º programs.
Programs with Fuzzy Detection of Full/Half load during heat step
Auto 65º, Auto Bio 50º, Intensive 70º, Normal 65º, Normal Bio 50º.
Hide quick links:
Advertisement
Table of Contents
