AEG Favorit 80800 Service Manual page 6

The circulation pump, wash and heating
The circulation pump is driven by a single phase asynchronous motor with a 4mF
Capacitor connected to the start winding.
Different speeds are used during the wash cycle, (depending upon which part of
the program is being performed).
These speeds are controlled by a Tachometric generator fitted on the end of the
motor.
During parts of the program a pulsed wash action is used, eg, (last hot rinse).
This pulsed wash action runs:
4 seconds at 1600 rpm
0.8 seconds at 2800rpm
The diverter valve allows the water to be alternated between the upper spray arm
and the bottom + ceiling spray arms.
During the heating steps the water is only supplied to the upper spray arm.
Circulation pump and
Diverter valve
The Heater
A 2100 watt tubular heater is situated in the base of the appliance.
During the heating steps the water is directed only to the upper spray arm.
The resistance is 25