Table of Contents
Advertisement
Test of individual components
With the machine switched off and no wash load.
Press and hold the Auto 65º and the Normal 65º buttons.
Push the ON/OFF button.
The LEDs for the Auto 65º and the Normal 65º programs will flash.
Push the Auto 65º button.
Each individual componet will operate for 5 seconds in the following order.
1:
Inlet valve
2:
Regeneration valve
3:
Circulation pump
4:
Diverter valve
5:
Drain pump
6:
Turbo drying fan and flap
7:
Detergent dispenser
After 2 minutes the test will automatically terminate.
Alternatively switch the machine off with the ON/OFF button.
Please Note: The heater is not operated during this test
Hide quick links:
Advertisement
Table of Contents
