AEG FAVORIT 80820 User Instructions
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FAVORIT 80820
  6. User instructions
AEG FAVORIT 80820 User Instructions

AEG FAVORIT 80820 User Instructions

Electrolux user instructions dishwasher favorit 80820
Hide thumbs Also See for FAVORIT 80820:
Table of Contents

Advertisement

Quick Links

FAVORIT 80820
Dishwasher
User Instructions

Advertisement

Table of Contents
loading

Related Manuals for AEG FAVORIT 80820

Summary of Contents for AEG FAVORIT 80820

  • Page 1 FAVORIT 80820 Dishwasher User Instructions...
  • Page 2 Dear customer, Please read these user instructions carefully. Please observe the safety instructions on the first few pages of these user instructions! Please keep these user instructions for later reference. Pass them on to any subsequent owner of the appliance. The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance.

  • Page 3: Table Of Contents

    Switching Off the Dishwasher ........
  • Page 4 Built-Under Dishwasher ........

  • Page 5: Operating Instructions

    • Keep all packaging away from children. • Keep all detergents in a safe place out of children’s reach. • The water in your dishwasher is not suitable for drinking. If there are still remnants of detergent in the appliance, there is a risk of burns! •...

  • Page 6: Correct Use

    • Only use detergents specifically designed for use in domestic dish- washers. • Do not put any solvents in the dishwasher. There is a risk of an explo- sion! • The anti-flood system provides dependable protection against dam- age due to leaks.

  • Page 7: Disposal

    • The dishwasher's interior light is always switched on as long as the door of the appliance is open. To save energy you should therefore always close the door of the dishwasher after loading or removing dishes.

  • Page 8: Appliance Features And Control Panel

    Operating Instructions Appliance Features and Control Panel Top Spray Arm Rubber Seal for Connecting the Water Feed to the Middle Spray Spray Arms Water hardness switch Container for Salt Container for Detergent Container for Rinse Aid Interior Lighting Filters Rating Plate...

  • Page 9: Control Panel

    – whether the rinse aid supply is switched on/off. – the start delay that is set. – how long the current wash programme can be expected to last. – which fault has occurred on the dishwasher. Set Start Delay Door Handle...
  • Page 10 SPRAY ARM The FILTER indicator is intended to remind you to check the filters in the dishwasher from time to time and, if necessary, to clean it. The indicator illuminates at regular intervals, independent of the amount of soiling of the filters.

  • Page 11: Prior To Using For The First Time

    3. Fill with Rinse Aid Adjusting the Water Softener To prevent the build up of scale on dishes and in the dishwasher, the dishes must be washed with soft, i.e. low lime content water. For this reason the dishwasher is fitted with a water softener in which tap water from a hardness of 4 °d (German degree) is softened with the aid...
  • Page 12 *factory setting Adjust the water softener to the hardness of the water in your area as stated in the table: 1. The dishwasher must be switched off. 2. Manual adjustment: Open the dishwasher door. 3. Remove the lower rack from the dishwasher.

  • Page 13: Filling With Salt For The Water Softener

    5. Clean any salt remnants on the container opening. 6. Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt.

  • Page 14: Rinse Aid

    Only use rinse aid specifically designed for domestic dishwashers. Never fill the rinse aid container with any other substance (e.g., vinegar con- centrate or dishwasher cleaning agent) as this would damage the appli- ance. Switching Rinse Aid Supply On and Off 1.

  • Page 15: Filling With Rinse Aid

    – prior to using the dishwasher for the first time – when the RINSE AID indicator on the control panel is illuminated. The rinse aid compartment is on the inside of the dishwasher door. 1. Open the door. 2. Press the rinse aid compartment release button with your finger.

  • Page 16: Adjusting Rinse Aid Dosing

    Switching the Acoustic Signal for the End of the Wash Programme On and Off In addition to the visual indication the dishwasher can be set to emit an audible signal at the end of a wash cycle. 1. The dishwasher must be switched off.

  • Page 17: In Daily Use

    – Dishes and items of cutlery must not lie inside one another, or cover each other Operating Instructions are of limited suitability: • Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher- safe by the manufacturer. • Glazed patterns may fade if machine washed frequently.

  • Page 18: Loading Cutlery

    Operating Instructions – To avoid damage to glasses, they must not touch – Do not lay small objects (e.g. lids) in the cutlery rack Loading Cutlery Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be posi- tioned horizontally in the upper basket.

  • Page 19: Loading Pans, Frying Pans And Large Plates

    On some models of dishwasher it is possible to open the cutlery basket. To ensure that the cutlery basket cannot open on removal from the appliance, you should always hold both parts of the two part handle. 1. Place the cutlery basket on a table or work surface 2.

  • Page 20: Loading Cups, Glasses And Coffee Services

    Operating Instructions 2. Fold the plate insert to the left. Loading Cups, Glasses and Coffee Services Load small, delicate items and long pointed cutlery in the upper rack. • Arrange items of crockery on the folding cups racks so that they are offset from each other and water can reach all items.

  • Page 21: Adjusting The Height Of The Upper Basket

    Adjusting the Height of the Upper Basket With upper basket raised With upper basket lowered The height of the basket can also be adjusted when it is loaded. Lowering the Upper Basket: 1. Pull the upper basket out completely. 2. Holding the upper basket at the rear right, lift it as far as it will go and then lower it vertically.

  • Page 22: Filling With Detergent

    Please observe the manufacturer's dosing and storage recommenda- tions as stated on the detergent packaging. The detergent compartment is on the inside of the dishwasher door. 1. If the lid is closed: press release button (1). The lid springs open.

  • Page 23: Concentrated Detergent

    Concentrated Detergent Based on their chemical composition, dishwasher detergents can be split into two basic types: – conventional, alkaline detergents with caustic components – low alkaline concentrated detergents with natural enzymes. The use of 50 °C wash programmes in conjunction with concentrated detergents reduces pollution and is good for your dishes;...

  • Page 24: Selecting The Wash Programme (Programme Table)

    Operating Instructions Selecting the Wash Programme (Programme Table) Choose the most suitable wash programme with the aid of this table: Type of Dishes In Addition Type of Soiling • heavily to lightly soiled • dried leftovers Suitable Wash Pro- AUTOMATIC gramme: Programme Pre Wash...
  • Page 25 Coffee Types of Service Dishes with delicate glasses • lightly soiled Used dishes that are col- lected in the dishwasher and are to be washed at a later point in time. ò ò GLASS PRE WASH 40 °C Pre Wash...

  • Page 26: Starting The Wash Programme

    Operating Instructions Starting the Wash Programme 1. Check that when the dishes and cutlery are loaded into the dishwasher the spray arms are free to rotate. 2. Open the tap fully. 3. Shut the door. 4. Press the ON/OFF button The ON/OFF button indicator illuminates.

  • Page 27: Pause Function

    1. Open the door of the dishwasher. The wash programme stops. 2. Shut the door. The wash programme continues. Cancelling the wash programme 1. Press the button for the wash programme in progress and keep it pressed. The programme indicator for the wash programme in progress flashes for a few seconds and then goes out.

  • Page 28: Load Sensing - Sensor Logic

    • Hot dishes can be sensitive to knocks. The dishes should therefore be allowed to cool down before removing them from the appliance. • Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and can cool down.

  • Page 29: Care And Cleaning

    Dirty filters will give poor wash results. 1. Open the door, remove the lower rack. 2. The dishwasher filter system com- prises a coarse/fine filter, microfilter and a flat filter. Unlock the filter sys- tem using the handle on the microfil- ter, and remove.
  • Page 30 During this process ensure that the flat filter does not protrude above the base of the wash- ing compartment. The dishwasher must not be used without filters under any circum- stances.

  • Page 31: What To Do, If

    What to do, if ... Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
  • Page 32 Close the door of the dishwasher. The door of the dish- Close the door of the dish- washer is open. washer.

  • Page 33: There Are Problems With The Operation Of The Dishwasher

    – In the case of scale deposits on the dishes: the special salt container is empty or the water softener is incorrectly adjusted. Possible Cause The door of the dishwasher is not closed properly. Mains plug is not plugged in. Insert mains plug.

  • Page 34: Technical Data

    1-10 bar (=10-100 N/cm = 0.1-1.0 MPa) Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door on the right. 850 x 600 x 600 (H x W x D in mm) 54 Kg 820 –...

  • Page 35: Notes For Test Institutes

    Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table). Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see Programme Table).

  • Page 36: Installation And Connection Instructions

    Free-Standing Appliances can be set up as stand-alone without additional installation. If the dishwasher is set up next to a gas or coal cooker, a heat- insulating, non-flammable plate must be mounted between the dishwasher and the cooker, flush to the top edge of the work surface (depth 57.5 cm).
  • Page 37 1 cm to the rear (2). 3. Lift the work surface at the front (3) and remove. If the dishwasher is later used as a free-standing appliance, the original work surface must be re-mounted. The plinth on free-standing appliances is not adjustable.

  • Page 38: Connecting The Dishwasher

    • The dishwasher must be connected to a cold water supply. • The dishwasher must not be connected to open hot water appliances or instantaneous water heaters. Permitted water pressure...

  • Page 39: Water Inlet Hose With Safety Valve

    If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water and the draining pump in the dishwasher is switched on. Please take care when installing the water inlet hose: –...

  • Page 40: Water Drain

    If the dishwasher is fitted at a high position If the dishwasher is installed at a high level, and the drainhose connec- tion is less than 30 cm from the bottom of the appliance, adapter kit ET 111099520 must be fitted.

  • Page 41: Leak Prevention System

    Installation and Connection Instructions Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention system, the AQUA CONTROL SYSTEM. In the event of a fault, the safety valve immediately interrupts the sup- ply of water to the appliance and the drain pump switches on.

  • Page 42: Electrical Connection

    Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

  • Page 43: Connections

    Connections The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher as there is insufficient space behind the appliance. The plumbing and electrical installation example given below can only be regarded as a recommendation.

  • Page 44: Guarantee Conditions

    Guarantee Conditions GUARANTEE CONDITIONS Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar doc- umentation.

  • Page 47: Service And Spare Parts

    SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to pur- chase spare parts, please contact Service Force by telephoning: 08705 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
  • Page 48 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 822 946 398 - 00 - 0602 Subject to change without notice...

Table of Contents