Setting Water Softener - AEG Favorit 80800 Service Manual

Hide thumbs Also See for Favorit 80800:
Table of Contents

Advertisement

Setting the Water Softener
The dishwasher must be switched off.
Press and hold the Auto 65º and the Auto Bio 50º buttons.
Press the ON/OFF button.
Both the Auto 65º and the Auto Bio 50º will flash and the buttons can be released.
Press the Auto Bio 50º button and the softener setting will be displayed in the
multi-display.
The softener has 9 settings and every time the Auto Bio 50º button is pushed the
displayed setting is increased by 1.
Once the correct setting has been made press the ON/OFF button to switch the
machine off.
The new setting will now be saved.
The water hardness is shown in the customers handbook in German degrees and
Parts per million
Setting the End of Program audible signal
Press and hold the Auto 65º and the Auto Bio 50º buttons.
Press the ON/OFF button. (the two program lamps will flash)
Pushing the Auto 65º button will indicate the current setting in the multi-display.
Pressing the Auto 65º button again will change the setting and indicate it in the
multi-display.
b0 = audible signal off
bI = audible signal on
Once the desired setting has been selected, switch off the machine.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents