Getting Started; Tools Required For Assembly; Assembly Instructions - Napoleon MIRAGE 605 Assembly And Operating Instructions Manual

Outdoor stainless steel gas grill

Hide thumbs Also See for MIRAGE 605:

Table of Contents

CAUTION:

During unpacking and assembly it is recommended that you wear work gloves

and safety glasses for your protection. Although we make every effort to make the assembly

process as problem free and safe as possible, it is characteristic of fabricated steel parts that the

edges and corners may be sharp and can cause cuts if handled incorrectly during assembly.

GETTING STARTED

1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any compo-

nents packed inside. Use the parts list to ensure all necessary parts are included.

2. Do not destroy packaging until grill has been fully assembled and operates to your satisfaction.

3. Assemble BBQ where it is to be used, lay down cardboard or a towel to protect parts from being

lost or damaged while assembling.

4. Most stainless steel parts are supplied with a protective plastic coating that must be removed prior

to using grill.

5. Follow all instructions in the order that they are layed out in this manual.

6. Two people are required to lift the grill head onto the assembled cart.

10mm

WRENCH

OR RATCHET

If you have any questions about assembly or grill operation, or if there

are damaged or missing parts please call our customer care department

at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time)

11mm

WRENCH

OR RATCHET

(tools not included)

FLAT AND PHILIPS

SCREWDRIVERS

HAMMER

Table of Contents