Dc Power & Power Switch - Korenix JetBox 8150 User Manual

3­2­8 DC Power & Power Switch
Power is supplied through an external AC/DC power adapter or power DC In. Check
the technical specification section for information about AC/DC power input voltage.
See following figure and a side pictures.
DC‐Power Jack: Use External AC/DC power adapter
1.
Since the switch does include a power switch, plugging its power adapter into a
power outlet then switch power to on, when you final installed system hardware
device.
DC Power Connector: Use external 2‐pin apart able terminal block. (Please see
2.
Off: Power Off
DC +12V~+24V, 30W minimum
On: Power On
Korenix | Hardware Feature 15