Port Forwarding; Ddns Setup - HIKVISION DS-7604NI-E1 Quick Start Manual

PORT FORWARDING

After assigning the IP information to the NVR, connect a computer to the same router that the
NVR is connected to (wired connection is recommended, to avoid complications). Log into the
ROUTER, and proceed with PORT FORWARDING.
For PORT FORWARDING assistance contact the Internet Service Provider (ISP), or the router
manufacturer. Also refer to
Please be aware, that Hikvision USA is not associated with www.portforward.com, and not
responsible for any activity between the user and www.portforward.com. Please refrain from
downloading any software from the abovementioned website.
Proceed to the "ROUTERS" section for step by step instructions.

DDNS SETUP

DDNS registration has been made more user friendly, and takes only a few seconds to
complete. The legacy units require user registration on www.hik-online.com. This step is no
longer needed.
Click on the DDNS tab
In the DDNS tab:
a. Enable DDNS
b. Change the DDNS TYPE to HiDDNS (in some cases HkDDNS)
c. Make sure that the SERVER ADDRESS is set to
d. Create a DEVICE DOMAIN NAME (the domain name CANNOT contain spaces,
special characters and/or upper case letters, as well as it cannot begin with a
number)
www.portforward.com for port forwarding step by step instructions.
www.hik-online.com
www.hikvision.com/en/us